Cuts Through the Worst Mud, Fast
Mud Melter's formula breaks down caked-on dirt, clay, and trail grime without scrubbing. Spray it on, let it work, rinse it off — your bike is clean before the next moto.
Regular price
$7.95
Sale price
$7.95
Regular price
$7.95
Unit price
per
Couldn't load pickup availability
Features:
- Standard version Features
- Media enhancement by M-Pleating, increases Dust Holding Capacity (D.H.C) and reduces pressure drop
- The zigzag pleating pattern provides more filtration area allowing more dust holding capacity (DHC)
- Additional filtration area gives the oil more room to flow, resulting in lower pressure drop
- The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes
- Forming tapped thread for easy installation and spin-on
- Pre-lubricated gasket
- The gasket is lubed from the factory to aid installation
- The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection
- Performance version Features
- Standard features plus the following:
- Heat-resistant Anti-Drainback valve (ADBV)
- Unlike standard nitrile rubber, silicone rubber has a higher heat-resistance
- The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter
- 17mm Hex Nut
- Easy for service and removal after prolonged usage
- The nut is designed for safety wire attachment if needed
- **HARDDRIVE OIL FILTERS ARE "DECAL FREE" FOR CLEAN LOOK
Fp Oil Filter 652
Features:
- Standard version Features
- Media enhancement by M-Pleating, increases Dust Holding Capacity (D.H.C) and reduces pressure drop
- The zigzag pleating pattern provides more filtration area allowing more dust holding capacity (DHC)
- Additional filtration area gives the oil more room to flow, resulting in lower pressure drop
- The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes
- Forming tapped thread for easy installation and spin-on
- Pre-lubricated gasket
- The gasket is lubed from the factory to aid installation
- The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection
- Performance version Features
- Standard features plus the following:
- Heat-resistant Anti-Drainback valve (ADBV)
- Unlike standard nitrile rubber, silicone rubber has a higher heat-resistance
- The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter
- 17mm Hex Nut
- Easy for service and removal after prolonged usage
- The nut is designed for safety wire attachment if needed
- **HARDDRIVE OIL FILTERS ARE "DECAL FREE" FOR CLEAN LOOK
ATTRIBUTES:
BRAND: FIRE POWER
MPN: PS652
SKU: 841-9763
Fitment:
Gas-Gas EC 250F 2021 to 2022
Gas-Gas EX 250F 2021 to 2023
Husqvarna FC 250 2014 to 2023
Husqvarna FC 350 2014 to 2023
Husqvarna FC 450 2016 to 2022
Husqvarna FE 250 2014 to 2022
Husqvarna FE 350 2014 to 2023
Husqvarna FE 450 2017 to 2023
Husqvarna FE 501 2017 to 2023
Husqvarna FX 350 2017 to 2023
Husqvarna FX 450 2017 to 2022
KTM 250 EXC-F 2017 to 2023
KTM 250 SX-F 2013 to 2023
KTM 250 XC-F 2013 to 2023
KTM 250 XCF-W 2013 to 2016
KTM 350 EXC-F 2012 to 2023
KTM 350 SX-F 2011 to 2023
KTM 350 XC-F 2011 to 2023
KTM 350 XCF-W 2011 to 2016
KTM 350 XCF-W 2020 to 2022
KTM 400 XC-W 4-Stroke 2009 to 2010
KTM 450 EXC-F 2017 to 2023
KTM 450 EXC-R 4-Stroke 2008 to 2011
KTM 450 SX-F 2007 to 2012
KTM 450 SX-F 2016 to 2023
KTM 450 XC-F 2008 to 2010
KTM 450 XC-F 2016 to 2023
KTM 450 XCF-W 2008 to 2011
KTM 450 XCF-W 2023
KTM 500 EXC-F 2017 to 2023
KTM 500 XCF-W 2020 to 2022
KTM 505 Sx-F 2008 to 2009
KTM 505 Xc-F 2008 to 2009
KTM 530 EXC-R 4-Stroke 2008 to 2011
KTM 530 XC-W 4-Stroke 2008 to 2011
Secure your shopping experience with various safe and trusted payment methods.
Payment methods
-
Bikes
500+ cleaned
-
Race seasons
10+ tested
-
Satisfaction
100%
Safe on Every Surface
Formulated to be tough on mud but gentle on plastics, rubber, bearings, and graphics. No harsh solvents, no damage — just a clean bike ready for the next ride.
Made in a Real Race Shop
We didn't hire a marketing team to invent a product. We built Mud Melter because nothing else worked well enough on the bikes we were actually racing and rebuilding.
Load video: